Answers for "vba array"

vba array declaration

arrayData = Array("A", "B", "C", "D", "E")

[a1].Resize(UBound(arrayData)) = Application.Transpose(arrayData)

vba code to use array formula

Range("A1").FormulaArray = "=INDEX(subset!R1C1:R2472C10,MATCH(1,(RC1=subset!C1)(RC2=subset!C2)(RC5=subset!C5)*(RC6=subset!C6),0),10)"

excel vba array

'In Excel VBA, the quickest way to pull data from a worksheet into a VBA array
'is to do it all at once:

Dim v As Variant
v = Range("a1:b20").Value

'Please note that, here, 'v' is a scalar variable of type Variant. Scalar means
'that 'v' is NOT an array. But interestingly in this case, 'v' can be 
'treated exactly like an array. To understand why, please keep reading...

'Variant variables can be assigned many types of values, for example, 
'all of the following (and many others) are valid:

v = 123
v = 12.19971
v = "abcdefg"
Set v = New Collection

'IN ADDITION, a Variant can also be assigned an entire array, dynamic or static:

Dim v As Variant, arr() As Long
  
ReDim arr(1 to 4)
arr(1) = 11
arr(2) = 12
arr(3) = 13
arr(4) = 14
  
v = vArrA
  
'Now that the array of Longs 'arr' has been assigned to the Variant 'v', we can
'access the elements directly from 'v':
  
MsgBox v(4)		'<--displays: 14
  
'A very efficient way to read data from a worksheet range is to directly assign
'the data to a Variant by having that variable point to an array of Variants:
 
v = Sheet1.Range("a1:b20").Value
  
'The 'Value' property of the Range object creates a 2D array of Variant 
'elements the same size as the specified range, in this case,
'20 rows of 2 columns, with a lower bound of 1 for both array dimensions.
'Here, we assign that array directly to the scalar Variant 'v', all in one go. 
'The scalar Variant 'v' can now be treated as an array, even though it is 
'actually a scalar variable that points to an array THAT WAS NEVER NAMED:
  
MsgBox v(2, 20) 	'<--displays: the value that was in Sheet1, cell B20
  
'As long as the worksheet range consists of more than one cell, this method
'always results in an array and that array is always 2D. It is never 1D.

'If the range consists of only ONE cell, then this method does NOT create an
'array; instead, it assigns that one cell's scalar value to the Variant 'v'.
'This one-cell treatment must bo gaurded against.
  
'However, this shortcut method of copying Excel ranges to VBA arrays is
'very convienent and its use is common. The advantage is not only
'extremely concise code; this technique is much faster than copying
'cell-by-cell... and the speed improvement grows with the size of
'the range being copied.

'The code can even be shortened:
  
v = [Sheet1!a1:b20]
  
'The square brackets are a shorthand notation for VBA's Evaluate() function.
'This shorthand produces exactly the same results as the previous example,
'because the Evaluate() function returns a Range object in this instance and
'the default property of the Range object is the 'Value' property.

'In the above examples, the Range object is returning its 
'default... the Range.Value property. But keep in mind that the
'Range.Value2 property is roughly 20% quicker. So it slightly more
'performant to code these two examples like so:

v = [Sheet1!a1:b20].Value2
v = Sheet1.Range("a1:b20").Value2
  
'Important: the array created using the 'Value' or 'Value2' properties
'           is completely detached from the source range on the
'           worksheet. Either can be updated and the changes will NOT 
'           affect the other.


'Note: VBA utilizes the OLE/COM SAFEARRAY data structure for its
'      array implementation:
  
'      https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-oaut/2e87a537-9305-41c6-a88b-b79809b3703a
' 	   https://ecs.syr.edu/faculty/fawcett/Handouts/cse775/presentations/BruceMcKinneyPapers/safeArrays.htm
'	   http://www.roblocher.com/whitepapers/oletypes.html
'
'
'

vba array

'VBA arrays can be fixed-size (static) or resizable (dynamic).
'This is determined when the array is declared:
Dim vArrA()			'dynamic: size is determined later.
Dim vArrB(1 to 5)	'static:  size is determined now and cannot be changed.

'Array size refers to the number of elements in the array. For example, vArrB()
'above has five elements. The "1 to 5" is referred to as the array's range of
'indices. The range size must be positive, meaning the number of elements must 
'be positive. This means that the 2nd integer in the range must be greater 
'or equal to the first integer.

'VBA is unusual among programming languages with regards to the lowerbound or 
'the base, of arrays. Most languages require arrays to have a base (or lowerbound)
'of zero. VBA arrays can have lowerbounds of ANY Long Integer value
'(-2147483648 through +2147483647). So, all of the following are valid:

Dim vArrC(0 to 9)
Dim vArrD(1 to 10)
Dim vArrE(11 to 20)
Dim vArrF(-8877 to -8868)
Dim vArrG(-5 to 4)

'vArrC through vArrG are perfectly legal and each has precisely 10 elements. Note
'that the size AND the bounds are fixed for static arrays. Both of these
'attributes can be changed for dynamic arrays whenever the need arises:

ReDim vArrA(1 to 1000)

'And at a later point:

ReDim vArrA(0 to 4)

'A third attribute of VBA arrays is the number of dimensions. Every example on
'this page thus far represents a 1D array. Another term for a one-dimensional
'array is vector. A vector does not really have rows or columns, just
'elements.

'However, when writing a 1D array to a worksheet, Excel treats the array as if 
'it were a 2D array consisting of 1 row and n colums (where n is equal to the
'number of elements). This fact causes confusion for many.
'Consider:

ReDim vArrA(1 to 5)
vArrA(1) = "m"
vArrA(2) = "n"
vArrA(3) = "o"
vArrA(4) = "p"
vArrA(5) = "q"
Sheet1.Range("A1:E5") = vArrA

'Sheet1 now has the following values:
'    A   B   C   D   E
'1   m   n   o   p   q
'2   m   n   o   p   q
'3   m   n   o   p   q
'4   m   n   o   p   q   
'5   m   n   o   p   q

'This is why Transpose() is required to write the 1D array vertically:

Sheet1.Range("A1:E5") = WorksheetFunction.Transpose(vArrA)

'Sheet1 now has the following values:
'    A   B   C   D   E
'1   m   m   m   m   m
'2   n   n   n   n   n
'3   o   o   o   o   o
'4   p   p   p   p   p   
'5   q   q   q   q   q

'Notice that the one array with five elements can be written to multiple rows
'or with Transpose() to multiple columns. Of course, the array can be 
'written to one row:
Sheet1.Range("A1:E1") = vArrA

'Or to one column:
Sheet1.Range("A1:A5") = WorksheetFunction.Transpose(vArrA)

'Since Excel treats 1D arrays (vectors) oddly when writing to a worksheet, it
'can be easier to work with 2D arrays. In Excel VBA, 2D arrays are row major.
'This means that rows are represented by the first dimension and columns are 
'represented by the second.

ReDim vArrA(1 to 5, 1 to 10)
'            ^rows   ^cols

'vArrA is now sized as a 2D array with 5 rows of 10 columns. It can be written
'to a worksheet with 5 rows of 10 columns without using Transpose().

'Size, lower and upper bounds, and number of dimensions 
'are all fixed for static arrays and they are all specified when the array is 
'declared:

Dim vArrH(0 to 9, 1 to 10)

'vArrH is a static 2D array of 100 elements, 10 rows of 10 columns, with
'0 as the lowerbound for the first dimension (the rows) and 1 as the lowerbound
'of the second dimension (the columns). None of these attributes can later
'be changed for vArrH, since it is a static (or fixed) array. In contrast,
'all three of these attributes can be changed for a dynamic array... at any time.

'The max number of dimensions supported for an array is 60, though
'it is unusual to use arrays with more than 3 dimensions. Conceptually, a
'1D array is a vector, a 2D array can be thought of as a worksheet with rows
'and columns, a 3D array can be thought of as a workbook with multiple
'worksheets (or a cube), and a 4D array can be thought of a folder of workbooks 
'(or perhaps a hypercube). But keep in mind that each dimension can be declared
'with a different number of elements. For example, a 4D dynamic array:

ReDim vArrA(0 to 4, 1 to 10, 3 to 7, 1 to 2)
'           ^rows   ^cols    ^sheets ^books

'A fourth attribute of arrays is the data type. VBA's default data type
'is the Variant. If no data type is specified then by default the data type is actually Variant. So all the
'examples so far are Variant arrays, that is an array where every single element
'is of data type Variant.

'Here are some other data type array examples. They can be written verbosely
'or in some cases with a type declaration character:

Dim a() As Double   'or... Single, Short, Long, Currency, String, Byte, Date
					'or... Boolean, UserDefinedType, ClassName, Object

Dim a#()			'or... a!(), a%(), a&(), a@(), a$()

'Note: 64bit VBA also includes the LongLong data type:
Dim a() As LongLong 'or... a^()