raspberry pi wifi setup wpa_supplicant
Create a file in the root of boot called: wpa_supplicant.conf (instructions below). Then paste the following into it (adjusting for your ISO 3166 alpha-2 country code, network name and network password):
country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="NETWORK-NAME"
psk="NETWORK-PASSWORD"
}raspberry pi connect to wifi via terminal
Setting country (Important for legal reasons):
If this has been done before then skip this section (Only needs to happen once)
sudo raspi-config
Localisation Options > Set legal wireless channels for your country (this is important)
Finish (Will require reboot)
Scanning for networks:
If you know your networks SSID and other relevant info, skip this section
iwlist wlan0 scan
Find 'ESSID' which will contain the name of your network
Find 'IE: IEEE 802.11i/WPA2 Version 1' (This guide should work for WPA and WPA2 but maybe not for WPA2 enterprise, for WEP hex keys, see here: https://www.freebsd.org/cgi/man.cgi?query=wpa_supplicant.conf&sektion=5&apropos=0&manpath=NetBSD+6.1.5)
Find the password to the network (You need to figure that one out on your own ;)
Adding network:
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
For each network that you want to add
network={
ssid="CoolNetworkName"
psk="SecureNetworkPassword"
}Copyright © 2021 Codeinu
Forgot your account's password or having trouble logging into your Account? Don't worry, we'll help you to get back your account. Enter your email address and we'll send you a recovery link to reset your password. If you are experiencing problems resetting your password contact us
