arduino wireless communication
#include <RH_ASK.h> // Include the RH_ASK library
#include <SPI.h> // Not actually used but needed to compile the RH_ASK libraryarduino wireless communication
#include <RH_ASK.h> // Include the RH_ASK library
#include <SPI.h> // Not actually used but needed to compile the RH_ASK libraryarduino wireless communication
void loop()
{
// Create a 32 byte char buffer
uint8_t receive_buffer[32];
uint8_t buflen = sizeof(receive_buffer);
// If data is available, print it
if (radio.recv(receive_buffer, &buflen))
{
Serial.print("Message: ");
Serial.println((char*)receive_buffer);
}
}arduino wireless communication
void loop()
{
// Create our message
const char *msg = "Hello World";
// Send our message
radio.send((uint8_t*)msg, strlen(msg));
// Wait until the data has been sent
radio.waitPacketSent();
// Delay since we dont want to send a trillion packets
delay(1000);
// Also inform the serial port that we are done!
Serial.println("Data Sent");
}arduino wireless communication
RH_ASK radio(2000, 11, 12);
void setup()
{
Serial.begin(9600); // Use this for debugging
// Speed of 2000 bits per second
// Use pin 11 for reception
// Use pin 12 for transmission
if (!radio.init())
{
Serial.println("Radio module failed to initialize");
}
}arduino wireless communication
RH_ASK radio(2000, 11, 12);
void setup()
{
Serial.begin(9600); // Use this for debugging
// Speed of 2000 bits per second
// Use pin 11 for reception
// Use pin 12 for transmission
if (!radio.init())
{
Serial.println("Radio module failed to initialize");
}
}arduino wireless communication
#include <RH_ASK.h> // Include the RH_ASK library
#include <SPI.h> // Not actually used but needed to compile the RH_ASK libraryarduino wireless communication
void loop()
{
// Create a 32 byte char buffer
uint8_t receive_buffer[32];
uint8_t buflen = sizeof(receive_buffer);
// If data is available, print it
if (radio.recv(receive_buffer, &buflen))
{
Serial.print("Message: ");
Serial.println((char*)receive_buffer);
}
}arduino wireless communication
void loop()
{
// Create our message
const char *msg = "Hello World";
// Send our message
radio.send((uint8_t*)msg, strlen(msg));
// Wait until the data has been sent
radio.waitPacketSent();
// Delay since we dont want to send a trillion packets
delay(1000);
// Also inform the serial port that we are done!
Serial.println("Data Sent");
}Copyright © 2021 Codeinu
Forgot your account's password or having trouble logging into your Account? Don't worry, we'll help you to get back your account. Enter your email address and we'll send you a recovery link to reset your password. If you are experiencing problems resetting your password contact us
